Orban OPTIMOD-FM 8600Si, Руководство по эксплуатации

Страница: 105 / 356

OPTIMOD-FM DIGITAL INSTALLATION
2-49
A) Connect the telephone line from the wall phone jack to the wall connection
icon on the back of the modem (modem in).
B) Connect the modem to the 8600Si’s serial port with a standard (not null) mo-
dem cable.
The cable provided with your 8600Si is a null modem cable and will not
work.
C) Set the modem to
A
UTO
A
NSWER
and turn it on.
For 3Com/U.S. Robotics® 56kbps fax modem EXT, set dipswitches 3, 5,
and 8 in the down position to activate the
A
UTO
A
NSWER
setting. All other
dipswitches should be set to the up position.
4. Prepare the 8600Si for direct serial connection through the serial port:
[Skip this step if you will not be using a modem connection.]
A) Navigate to
Setup
> N
ETWORK
& R
EMOTE
.
B) Hold down the
PC C
ONNECT soft button and turn the knob until you see
D
IRECT on the display.
You are now ready to connect your computer to your 8600Si through a
null modem cable connected to your computer’s serial port. Refer to
Installing 8600Si PC Remote Control Software on page 2- 60.
Connecting to the 8600’s Ethernet Port or Serial Port via a Ter-
minal Program on a PC
You can connect a terminal emulation application to the 8600’s Ethernet or serial
port via TCP/IP, port 23 (which is the standard Telnet port and the 8600 factory de-
fault). When connected like this, you can:
•
recall presets (step 1 on page 2-53)
•
turn the diversity delay on and off for a specified output (step 2 on page 2-53)
•
trim the diversity delay (step 3 on page 2-54)
•
change the polarity of the analog-processed output (step 4 on page 2-54)
•
Select the analog or digital input as the audio source (step 5 on page 2-55)
•
Fetch real-time operational status information from the Optimod (step 6 on page
2-55)
•
Fetch information about the active processing preset (step 7 on page 2-56)
•
Fetch diagnostic information from the 8600 (step 8 on page 2-56)
This interface can be used to allow custom third-party applications (including auto-
mation systems) to recall presets, view status and set the controls listed above.