The subnet you select for this vNIC should be the one you created for
management traffic.
5.
Select the ASSIGN A PUBLIC IP ADDRESS option.
Boot Volume
If a larger boot volume is desired, select Specify A Custom Boot Volume Size and
enter the number in gigabytes. You can use the default size or manually specify for
your deployment. If manually specifying disk size, use the formula ((2 * RAM) + 12GB)
to ensure your disk size is adequate. See the Platform Preparation and Installation
Guide for extended detail on disk partitions and size.
Add SSH Keys
If needed, you may inistantiate your OCSBC with your own SSH public key configured
as an authorized-key for the local admin account.
1.
Copy your client's SSH public key.
Note:
On Linux, a user's SSH public key is stored in the
.ssh/id_rsa.pub
file. If this file does not exist, create it with the command
ssh-keygen -t
rsa -b 4096
.
2.
In the Add SSH keys section, select Paste SSH Keys.
3.
Paste your SSH public key into the SSH Keys field.
Creating the Virtual Machine
1.
Confirm your settings are correct.
2.
Click Create to instantiate your OCSBC.
3.
On the Work Requests page, note the public IP address and the OCID.
Selecting Networks and Subnets
The minimum OCSBC deployment typically has four interfaces, so at a minimum use
Create vNIC under Attached VNICs to add:
Chapter 7
Create and Deploy on OCI
7-28
Содержание netra X5-2
Страница 101: ...Chapter 7 Create and Deploy on Azure 7 35 ...
Страница 127: ...Figure 11 7 BMC Step 9 10 Click Next after the write operation is complete Chapter 11 Creating a Build Image 11 5 ...
Страница 151: ...Appendix A Acme Packet 6300 6350 Physical Interfaces A 12 ...
Страница 152: ...Note The Quad 10 GbE NIU must go in slot 0 Appendix A Acme Packet 6300 6350 Physical Interfaces A 13 ...
