b.
wancom1
c.
wancom2
d.
spare
e.
s0p0
f.
s1p0
g.
s0p1
h.
s1p1
If your hypervisor randomly allocates addresses for network interfaces, the interface
order at the hypervisor does not necessarily match that at the OCSBC. You can use the
interface-mapping show command to determine the MAC address to interface order,
and if necessary, adjust it using the interface-mapping swap command.
13.
If you want to increase the default disk size, click the Disks tab and the pencil icon to set
a larger disk size.
Do not decrease disk size.
14.
Click the Boot Order tab and ensure that Disk is the first (or only) option in the boot order
list.
15.
Click OK.
The system applies your settings to your VM.
16.
Click the Console icon from the menu bar.
Oracle VM Manager displays a terminal screen with the serial CLI operational.
17.
Highlight the target and click the Start button.
Oracle VM Manager starts your VM, displaying the startup sequence and, ultimately,
providing ACLI access in the console.
Create and Deploy on KVM
For complete KVM documentation, refer to
http://www.linux-kvm.org/page/Documents
1.
Install the Virtualization Host group and virt-install.
# yum groupinstall "Virtualization Host"
# yum install virt-install
2.
Extract the image.
# tar xvf nnSCZ739.64-img-vm_kvm.tar
nnSCZ739.64-img-vm_kvm.ovf
nnSCZ739.64-img-vm_kvm.qcow2
legal.txt
3.
Use virt-manager to create the management and media network interfaces.
•
Create a virtual bridged network for management interfaces.
•
Create virtual networks for media interfaces.
Chapter 6
Create and Deploy on KVM
6-3
Содержание netra X5-2
Страница 101: ...Chapter 7 Create and Deploy on Azure 7 35 ...
Страница 127: ...Figure 11 7 BMC Step 9 10 Click Next after the write operation is complete Chapter 11 Creating a Build Image 11 5 ...
Страница 151: ...Appendix A Acme Packet 6300 6350 Physical Interfaces A 12 ...
Страница 152: ...Note The Quad 10 GbE NIU must go in slot 0 Appendix A Acme Packet 6300 6350 Physical Interfaces A 13 ...
