manualshive.com logo in svg

Oracle netra X5-2, Руководство по установке

Поделиться
Скачать
Oracle netra X5-2 Скачать руководство пользователя страница 34

Connect ILOM to the Oracle X7-2

Use the following procedure to make a connection to the Oracle X7-2 Oracle
Integrated Lights Out Manager (ILOM) port. For a remote permanent connection to the
Service Processor over the ILOM connection, use the rear panel NET MGT port.

Note:

Keep Ethernet cables separated from power cables by at least 60mm where
possible and never run them in the same channel of the rack without
segregation.

•

Category 6 (or better) Ethernet

1.

Locate the cable to connect to the Oracle X7-2 for Communications.

2.

Plug the RJ-45 connector into the ILOM port.

Figure 3-15    Connecting to ILOM over the Network

NET MGT

(ILOM)

3.

Lead the cable neatly away from the rear panel.

4.

Connect the other end of the cable to the LAN.

•

Refer to the Oracle X7-2 hardware documentation (

https://docs.oracle.com/cd/

E72435_01/html/E72440/index.html

) for information on how to configure the Web

browser application to connect to the console, and how to establish
communications with the Oracle X7-2.

Software Installation - Oracle X7-2 Platforms

The Oracle Communications Session Router (OCSR) requires software installation
when deployed on the Oracle X7-2.

Software Installation Process

Software installation to Oracle X7-2 includes the following high-level steps:

1.

Insert your installation media into the USB slot. Alternatively, connect the ISO
image by way of ILOM virtual media.

Note:

Please review the Oracle X7-2 Product Notes. Notes for release 1.1.3
describe the requirement to maintain the default of SSL enabled for any
OS installation.

Chapter 3

Software Installation - Oracle X7-2 Platforms

3-12

Содержание netra X5-2

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды