enables greater scaling capacity, and the use of DDR4 running at 1050MHz provides a
memory performance boost.
Note:
When using the 4x10GbE NIU, you must put it in slot 0.
Acme Packet 6300
Acme Packet 6300 Media Interface
The Acme Packet 6300 contains three PHY card slots. Slots 0 and 1 support network-facing
media interface cards. Slots 1 and 2 support transcoding cards. The Acme Packet 6300 PHY
cards contain 2x10Gb Ethernet ports.
The Acme Packet 6300 only supports the 2x10GbE Network Interface Unit (NIU).
Note:
Do not put any 2x10Gb NIU into slot 2.
Figure A-6 Acme Packet 6300 Media Interfaces
The following table maps the reference numbers in the preceding illustration and the labeling
on the media interfaces. It also lists the operation-type, slot, and port parameters in the
phy-interface configuration element for the applicable interfaces. The table distinguishes
between these using "left" and "right", with the perspective of you looking at the NIU panel.
Graphic Label
NIU Label
Operation-type
Slot
Port
1
NA (left)
Media
0
0
2
NA (right)
Media
0
1
3
NA (left)
Media
1
0
4
NA (right)
Media
1
1
Appendix A
Acme Packet 6300/6350 Physical Interfaces
A-9
Содержание netra X5-2
Страница 101: ...Chapter 7 Create and Deploy on Azure 7 35 ...
Страница 127: ...Figure 11 7 BMC Step 9 10 Click Next after the write operation is complete Chapter 11 Creating a Build Image 11 5 ...
Страница 151: ...Appendix A Acme Packet 6300 6350 Physical Interfaces A 12 ...
Страница 152: ...Note The Quad 10 GbE NIU must go in slot 0 Appendix A Acme Packet 6300 6350 Physical Interfaces A 13 ...