Oracle Netra Server X3-2, Руководство по установке

Страница: 42 / 126

34 Netra Server X3-2 Installation Guide • May 2013
Related Information
■
“Install the Server (4-Post, 19-Inch Sliding Rail Kit)” on page 34
■
“Tools Needed for Installation” on page 22
■
“Handling Precautions” on page 20
■
“Rack Cautions” on page 23
▼
Install the Server (4-Post, 19-Inch Sliding Rail
Kit)
Note – The front-to-back rail spacing must be at least 15.43 in.(392 mm) and not
more than 34 in. (863.6 mm) from the outside face of the front rail to the outside face
of the back rail.
4 Screws
5 Telco slide assemblies (2)
6 Long brackets (2)
TABLE:
19-Inch Sliding-Rail Screws
Quantity Description Where Used
10 M4 x 0.5 mm x 5 mm Phillips panhead screws 8 for glides, 2 extra
10 M6 brass collar screws 4 for short brackets, 4 for long brackets, 2 extra
8 M5 panhead screws, nuts, plain washers and
star washers 8 for slides
10 M5 x 12.7 mm screws 10 for rack, if appropriate
12 M6 x 13 mm screws 10 for rack, if appropriate
9 M6 square clip nuts 9 for rack, if appropriate
10 10–32 collar screws 4 short, 4 long, 2 extra 8 for racks with 10 to 32 holes, if appropriate
12 10-32 x 0.5 in. combo head screws 12 for rack, if appropriate
12 12-24 x 0.5 in. combo head screws 12 for rack, if appropriate
TABLE:
19-Inch Sliding-Rail Kit Contents
No. Description