Oracle Netra Server X3-2, Руководство по установке

Страница: 88 / 126

80 Netra Server X3-2 Installation Guide • May 2013
Related Information
■
“Cable the SP” on page 81
■
“Cable the Ethernet Ports” on page 81
■
“(Optional) Connect Other Data Cables” on page 82
■
“Identifying Ports” on page 82
■
“Rear Panel Components (Installation)” on page 7
3 SER MGT A serial connection through an RJ-45 connector.
This port supports local connections to the SP
and is limited to CLI interaction with Oracle
ILOM.
These are the default settings:
• 8N1: eight data bits, no parity, one stop bit
• 9600 baud
• Disable hardware flow control (CTS/RTS)
• Disable software flow control (XON/XOFF) • A terminal device – can be a terminal, a
connection to a terminal server, or
computer such as a laptop running
terminal emulation software.
• A cable to connect the terminal device to
the SER MGT port.
For pinout information, see “SER MGT Port”
on page 83
4 NET MGT A 10/100BASE-T Ethernet connection through
an RJ-45 connector. This port supports remote
connections to the SP using the Oracle ILOM
CLI and web interface.
By default, this port is configured to use DHCP
or an IPv6 router to automatically obtain an IP
address. Alternatively, you can assign a static IP
address to this port.
To use this port, it must have its network
settings configured. Once configured, you use
the NET MGT port IP address to login to the SP
using a browser or secure shell.
• An Ethernet cable to connect to the NET
MGT port to your network.
• An IP address for this port (required from
DHCP or a static address)
For pinout information, see “NET MGT
Port” on page 84 .
Note - If your environment does not provide
DHCP services, first use the SER MGT port
to configure the NET MGT port parameters.
5 NET
(0 - 3) Four 10 Gigabit Ethernet ports enable you to
connect the server to your network. • An Ethernet cable to connect to the NET 0
port to your network.
• Network parameters such as an IP
address (can be provided by DHCP
services or assigned a static address in the
OS)
• Additional cables and Ethernet addresses
as needed for additional connections to
NET 1 - 3.
For pinout information, see “Gigabit
Ethernet Ports” on page 84 .
No. Port Description You Need: