Oracle Netra Server X3-2, Руководство по установке

Страница: 103 / 126

Powering On the Server the First Time 95
5. Secure the grounding lug to the grounding studs using the two M5 nuts.
6. Secure the other end of the grounding wire to the earth ground in the building.
You can secure the grounding wire to a proper grounding point on the rack, as
long as the rack is properly grounded to the earth ground in the building.
7. Assemble the DC input power cord.
See “Assemble the DC Input Power Cord” on page 95 .
Related Information
■
“Assemble the DC Input Power Cord” on page 95
■
“Install Strain Relief Housings” on page 99
■
“Connect DC Power Cords” on page 102
■
“Power On the Host for the First Time” on page 103
▼
Assemble the DC Input Power Cord
Assemble one DC input power cable for each DC power input to your server.
1. Verify that you have met these conditions:
■
Install a DC power source that meets the server’s input power specifications.
See “AC and DC Power Supply Specifications” on page 11 .
■
Secure DC power cables that meet the server’s power cabling specifications.
See “DC Power Source, Power Connection, and Grounding Requirements” on
page 14 .
■
Attach the DC input plug to the DC input power cables. The input plug is
provided in the server’s shipping kit.
See “Shipping Kit Inventory” on page 19 .
2. If the power cables are already connected to a DC power source, de-energize the
cables by removing fuses, opening circuit breakers, or turning off the DC
source.
No.
1 Earth ground cable secured in the grounding
lug
2 M5 nuts