Oracle Fabric Interconnect F2-12, Руководство по установке, Страница: 57 / 118

General Cable Precautions
Do not twist the cable to open a kink. If it
is not severe, open the kink by unlooping
the cable.
Do not pack the cable to fit a tight space.
Use an alternative cable route.
Do not straighten the cable to correct a
bend that is too tight. Leave the cable
bend as is.
Do not hang the cable for a length
more than 2 meters (7 feet). Minimize
the hanging weight with intermediate
retention points.
Do not drop the cable or connectors from
any height. Gently set the cable down,
resting the cable connectors on a stable
surface.
Do not cinch the cable with hard fasteners
or cable ties. Use soft hook-and-loop
fastener for bundling and securing cables.
Do not drag the cable or its connectors
over any surface. Carry the entire cable to
and from the points of connection.
Do not force the cable connector into the
receptacle by pushing on the cable. Apply
connection or disconnection forces at the
connector only.
Related Information
■
“Chassis Cable Requirements” on page 51
■
“I/O Module Cable Requirements” on page 52
■
“Standard MT and PrizmMT Cables” on page 53
■
“Standard MT and PrizmMT Cable Precautions” on page 55
■
“(Optional) Assemble the QSFP Cables” on page 58
■
“(Optional) Assemble the SFP+ Cables” on page 60
■
“Route the Cables” on page 62
■
“Connect the RJ-45 Ethernet Cables” on page 63
■
“Connect the PrizmMT Cables” on page 66
■
“Connect the QSFP Cables” on page 69
■
“Secure Cables to the Cable Management Comb” on page 73
Connecting Cables 57