Oracle Fabric Interconnect F2-12, Руководство по установке

Страница: 98 / 118

Verify Connectivity
d. If the output of a known installed card is
not connected
, or the status of a
known-connected port is anything other than
connected
, investigate why.
Refer to detecting and managing faults in the Oracle Fabric Interconnect F2-12 Service
Manual and to the EMS module documentation.
e. Exit the EMS console.
SEFOS# exit
Connection closed by foreign host
Entering character mode
Escape character is '^]'.
start: The session with /System/Networking/Switches/Switch_0/fs_cli has ended.
->
5. Verify configuration.
a. Start the host.
-> start /HOST/console
Are you sure you want to start /HOST/console (y/n)? y
Serial console started. To stop, type ESC (
b. Press Enter to display the login prompt.
hostname
login:
Password:
where hostname is the host name of the SCP.
c. Use the appropriate option to complete the login prompt:
■
If this is the first time you have booted up the virtualization switch,
complete the Oracle Fabric OS configuration wizard.
See “Run the Oracle Fabric OS Configuration Wizard” on page 102
■
If you have already completed the Oracle Fabric OS configuration
wizard, log in as
admin
with password that was configured through the
Oracle Fabric OS configuration wizard.
hostname
login: admin
Password:
password
Welcome to OFOS Controller
Copyright (c) 2012, 2016, Oracle and/or its affiliates. All rights reserved.
98 Oracle Fabric Interconnect F2-12 Installation Guide • November 2016