Oracle Fabric Interconnect F2-12, Руководство по установке

Страница: 101 / 118

Verify Connectivity
■
v-resources
– Indicates a value for internal switch use. This value is not useful to
customers.
b.
Display the state of the IB ports.
[OFOS] show infiniband-port
name state mode_state guid
--------------------------------------------------------------
6/1 up/down switching 0
6/2 up/down switching 0
6/3 up/down switching 0
6/4 up/down switching 0
7/1 up/down switching 0
7/2 up/down switching 0
7/3 up/down switching 0
7/4 up/down switching 0
embedded/1 up/down switching 0
embedded/2 up/down switching 0
embedded/3 up/down switching 0
embedded/4 up/down switching 0
12 records displayed
[OFOS]
In the output:
■
name
– Slot number as seen on the rear panel or port number for the interface.
Note -
In the output,
embedded
is the group of on-board interfaces at the left rear of the
switch.
■
state
– Operational and administrative state of the listed port.
■
mode_state
– State of the IB port as configured for switching or routing.
■
guid
– Node GUID of each switch port.
c. If the output of these commands displays a slot or local port is identified as
being in a
down
state, or if a
mode_state
is other than
switching
, investigate
why.
Refer to the detecting and managing faults in the Oracle Fabric Interconnect F2-12
Service Manual , and to the Oracle Fabric OS documentation for assistance.
d. Exit the host console.
Type
exit
and press the Enter key, then press the Esc key and type
(
.
[OFOS] exit
[root@azn111-222 ~]#
Serial console stopped.
Verifying Functionality 101