Oracle Fabric Interconnect F2-12, Руководство по установке

Страница: 36 / 118

Install the Rackmount Hardware
b.
Insert the outer flange into the square hole.
c.
Using the cage nut installation tool or flat-blade screwdriver as a guide,
catch the inner flange and pry it into the square hole.
d.
Pull the cage nut installation tool or flat blade screwdriver from the flange.
e.
Repeat to install a 10-32 cage nut into the other rear rack post.
10.
Install the cable management comb.
See “Install the Cable Management Comb” on page 37 .
Related Information
■
“Stabilize the Rack” on page 29
■
“Mark the Rack” on page 30
■
“Install the Cable Management Comb” on page 37
■
“Route the Power Cords and Management Cables” on page 38
■
“Install the Switch” on page 39
■
“Install an I/O Module” on page 42
■
“Remove a Filler Panel” on page 47
36 Oracle Fabric Interconnect F2-12 Installation Guide • November 2016