Oracle EXADATA X5-2 Скачать руководство пользователя

Страница: 183 / 262

Using UEFI

Using UEFI

The BIOS firmware controls the system from power-on until an operating system is booted.

The Oracle Exadata Storage Server X5-2 High Capacity contains a Unified Extensible

Firmware Interface (UEFI)-compatible BIOS that can be configured to support either UEFI

or Legacy BIOS modes. The BIOS can be configured to support either UEFI or Legacy BIOS

modes. Legacy BIOS is the default mode, and should be used with software and adapters that

do not have UEFI drivers

This section includes the following information:

■

“Selecting Legacy BIOS or UEFI Boot Mode” on page 183

■

“Switching Between Legacy BIOS and UEFI Boot Modes” on page 184

■

“UEFI Boot Mode Advantages” on page 184

■

“Configuration Utilities for Add-In Cards” on page 185

Selecting Legacy BIOS or UEFI Boot Mode

You can select either Legacy BIOS Boot Mode or UEFI Boot Mode. Legacy BIOS Boot Mode

is the default.

If you change BIOS boot modes, the boot candidates from the previously selected mode are

no longer available from the Boot Options Priority List in the BIOS Setup Utility. The boot

candidates from the new mode appear in the Boot Options Priority List only after you select

Save Changes and Reset from the BIOS Setup Utility menu. Use the Oracle ILOM BIOS

Backup and Restore function to preserve the BIOS configuration in case you want to switch

back to the previously selected mode. For information, refer to the Oracle Integrated Lights Out

Manager (ILOM) 3.2 Documentation Library at

http://www.oracle.com/goto/ilom/docs

All supported operating systems can use either UEFI Boot Mode or Legacy BIOS Boot Mode.

However, once you choose a boot mode and install an operating system, if you reboot the server

and select a different boot mode, the installed image can only be used in the mode in which

it was installed. For instructions for selecting either UEFI Boot Mode or Legacy BIOS Boot

Mode, see

“Select Legacy BIOS or UEFI BIOS Boot Mode” on page 188

Choose Legacy BIOS Boot Mode to allow host bus adapters (HBAs) to use option ROMs, and

when software or adapters do not have UEFI drivers. In Legacy BIOS Boot Mode, only boot

candidates that support Legacy BIOS Boot Mode appear in the Boot Options Priority List in the

BIOS Setup Utility.

Setting Up BIOS Configuration Parameters

183

Содержание EXADATA X5-2







































































































































































































































































Результаты поиска

Содержание EXADATA X5-2

Отзывы:

Похожие инструкции для EXADATA X5-2

Бренды по названию

Популярные бренды

Oracle EXADATA X5-2, Руководство по обслуживанию

Результаты поиска

Содержание EXADATA X5-2

Отзывы:

Похожие инструкции для EXADATA X5-2

Бренды по названию

Популярные бренды