Oracle EXADATA X5-2, Руководство по обслуживанию

Страница: 42 / 262

Assign Serial Port Output Using the Web Interface
Note -
The serial port sharing value by default is
owner=SP
.
3. Connect a serial host to the server.
Assign Serial Port Output Using the Web Interface
1. Log in to the SP Oracle ILOM web interface.
To log in, open a web browser and direct it using the IP address of the server SP. Log in as root
or a user with administrator privileges. See “Accessing Oracle ILOM” in the Oracle X5 Series
Servers Administration Guide .
The Summary Information screen appears.
2. In the Oracle ILOM web interface, select ILOM Administration → Connectivity
from the navigation menu on the left side of the screen.
3. Select the Serial Port tab.
The Serial Port Settings page appears.
Note -
The serial port sharing setting by default is
Service Processor
.
4.
In the Serial Port Settings page, select
Host Server
as the serial port owner.
5. Click
Save
for the changes to take effect.
6.
Connect a serial host to the server.
Ethernet Port Boot Order and Device Naming
This section contains information about the boot order and device naming for the four 10-
Gigabit Ethernet ports on the rear panel of the server. For location information, see “Rear Panel
Connector Locations” on page 39 . From right to left, the ports are numbered NET 0 to NET
3.
Ethernet Port Boot Order
The order in which the BIOS detects the Ethernet ports during server boot is listed below.
42 Oracle Exadata Storage Server X5-2 High Capacity Service Manual • January 2018