
© Optoma
Issue 2.1 July 25, 2018
76
Settings:
Stereo Analog / Analog with mic
Default:
Stereo Analog
For the analog audio source:
Settings:
CVBS / HDBaseT / Display Port / HDMI 1 / HDMI 2 / VGA / DVI / HDMI 3
Default:
The corresponding analog input associated with the video input
6.6.3.6.5
Digital Inputs
This menu is enabled when the audio assignments are done per Input.
For each of the digital video sources the user can select a Stereo Analog source, a Stereo analog
source with the mics, or the corresponding embedded audio within the video signal. If an analog
source is selected, the user can also select which of the analog source will be assigned to the input.
Settings:
Stereo Analog / Analog with Mic / Digital
Default:
Digital
If an analog audio source is selected:
Settings:
CVBS / HDBaseT / Display Port / HDMI 1 / HDMI 2 / VGA / DVI / HDMI 3
Default:
The corresponding analog input associated with the video input
6.6.3.7
Mic Config
This menu allows users to enable phantom power for condenser mics. When phantom power is
enabled, a voltage of +48V is sent to the condenser microphone via the XLR socket.
6.6.3.8
Audio Out Mute
This menu allows users to mute audio output source individually.
6.7
Status
This menu provides status information of the connections to the HDMI2, DVI/HDMI1 and HDBT outputs.
The unit reads the EDID of the attached monitor and makes decision based on its capabilities and the
configuration of the unit (Deep Colour and HDCP support). The type of attached monitor (DVI or HDMI),
video bit depth (8, 10 or 12 bit per colour channel) and HDCP encryption (on/off) is displayed.
Содержание LS200
Страница 1: ...PS200 PS200T PS300T LS200 LS200T LS300T 4K Scalers Switchers User s Manual...
Страница 2: ...Optoma Issue 2 1 July 25 2018 2 This page is intentionally left blank...
Страница 105: ...Optoma Issue 2 1 July 25 2018 105 APPENDIX D Unit Dimensions...
Страница 106: ...Optoma Issue 2 1 July 25 2018 106...