Optoma LS200, Руководство пользователя, Страница: 73 / 106

© Optoma
Issue 2.1 July 25, 2018
73
6.5.4 Network Settings
The Network Settings menu allows users to configure the unit´s TCP/IP address. Under Address Type a
static or DHCP leased address can be chosen. The static address, gateway address and netmask needs
to be entered manually.
The Network Settings menu provides information on the DHCP Status and IP address assigned to the
unit, as well as the fixed MAC Address programmed into the unit. The DHCP status can be Off when a
static assignment is used. When DHCP is on, the menu displays the leased address. If the lease is
unsuccessful, the menu displays “none”
If you select Static, ensure that the IP address of the computer is on the same network and it has the
same subnet mask and is in the same range as the unit. If the unit is at 169.254.0.1 and the computer
address is at 192.168.215.5, you need to change the unit’s IP address to an address that is in close
range with the computer, for example: 192.168.215.25. The unit’s IP address can be changed with the
rotary wheel. First push knob to enter the edit mode. Then turn the knob to increment or decrement
each digit and press the knob to move the cursor to the next digit. When you finish changing the IP
address, scroll down the menu and select “Apply” for the Network setting changes to become
effective.
Settings: Static, DHCP
Default: DHCP
6.5.5 Security Settings
The password for ftp and web access to the unit can be changed in this menu.
FTP password Default: user
WWW password : Off
6.5.6 Factory Defaults
This button allows users to restore all settings to the default values of the unit, allowing the unit to
return to a known (good) system state. A confirmation is requested prior to actual system settings
restore.
Make sure that no devices on the network that share the same IP address
Factory default does not affect the Network Settings