Optoma LS200, Руководство пользователя, Страница: 56 / 106

© Optoma
Issue 2.1 July 25, 2018
56
6.3.3 Splicing Width / Splicing Height
This menu defines the dimensions of the LED wall is defined with this menu. The maximum number of
LED screens supported is 16. This function is used in conjunction with the next function.
Settings: Units Wide: 1, 2, 3, 4 & Units High: 1, 2, 3, 4
Default: Units Wide: 1 & Units High: 1
6.3.4 Splicing Horizontal Position (Splicing H-pos) / Splicing Vertical Position (Splicing V-pos)
These settings provide the coordinates of the segment that the unit will process (cut out and resize).
This function is used in conjunction with the previous function.
Settings: 1 to 4 indicating co-ordinates 1,1, to 4,4 for the maximum matrix size of 16
Default: 1, 1
6.3.5 Splicing Setup
In a large LED walls where multiple units are driving different sections of the LED, the sections can be
equal or unequal in size. If the size of the different sections is equal, then the configuration is
standard. For standard configurations, the settings discussed so far are sufficient to defined the area
where the output image will be displayed. If the size of the sections is unequal, then the Advanced
splicing setup needs to be enabled in order to define the size of the area each section.
Standard mode works for wall configurations up-to 4x4. Advanced mode is limited to a maximum wall
size of 2x2.
Settings: Standard / Advanced
Default: Standard