Optoma LS200, Руководство пользователя, Страница: 63 / 106

© Optoma
Issue 2.1 July 25, 2018
63
6.4.1.3 PiP Banner
A banner is defined as a PiP that starts at the first left hand-side pixel and spans across the whole
width of the output image. When the Banner is selected, the width of the pip cannot be changed
because the software forces it to span across the output.
6.4.1.4 PiP Width
If the main input resolution is less than 4090x2160@60, the PIP width is limited by software to 80% of
the width of the output horizontal resolution. For example, if the output is set to 1920x1080p then
the PiP width is limited to 1576 pixels.
For input resolutions of 4090x2160@60, PIP width is limited by software to 40% of the width of the
output horizontal resolution.
These restrictions can be overridden by turning the system management setting to off, but there is a
risk of corruption to the main image if the main input is 3840x2160.
Examples of valid setups:
6.4.1.5 PiP Area
PiP can occupy only up-to half of the total pixel area of the output space. Examples of valid setups: