Optoma LS200, Руководство пользователя, Страница: 66 / 106

© Optoma
Issue 2.1 July 25, 2018
66
Software disables the PiP function in advanced LED wall setups. In advanced wall setups, the LED wall
is split unevenly. Only standard horizontal configurations where the LED wall is split evenly are
allowed.
6.4.2 PiP Menus
6.4.2.1 PiP Input
Selects the PiP source input. Depending on the specific model, some of these input selections may not
be available.
Refer to the PiP Source rule regarding the what input scan be selected. The rule states that the
main(background) and PiP sources cannot come from the same input channel. The input channels are
identified by the button colours on the front panel.
 Input Channel 1: SDI-1*

Input Channel 2: SDI-2 *

Input Channel 3: Display Port (DP)

Input Channel 4: HDMI-1, HDM-2, Streaming Video* and HDBT*

Input Channel 5: VGA, DVI, CV, RGB/YPbPr and HDMI-3
 Input Channel 6: Test Pattern and LOGO
*available on some models
Settings: SDI-1*, SDI-2*, Display Port, HDMI-1, HDMI-2, HDBaseT*, DVI, HDMI-3, VGA, YPbPr/RGB,
Composite Video, Test Pattern, LOGO
Default: HDMI-3
6.4.2.2 PiP Enable
This menu turns the PiP On or Off.
Settings: Off, PiP
Default: Off
6.4.2.3 PiP Status
This menu reports whether any PiP rules have been broken
Settings: Ok,
Default: OK
6.4.2.4 System Managed
Allows users to bypass the PiP area and width rules. If this is set to Off, some PiP settings may result in
a corrupted output video.
Some of the restrictions can be bypassed by setting the System Management to Off. In
this case, the image may display issues such as tearing.