Optimum Optimum 3292385, Руководство по эксплуатации, Страница: 17 / 80

Technical specification
Version 1.0.4 - 2020-10-13 17 Translation of original instruction
SD500AV EN
SD500A
V_G
B
_2.
fm
2 Technical specification
The following information represents the dimensions and indications of weight and the manu-
facturer‘s approved machine data.
2.1 Electrical connection
Drive motor of saw 400V ~50Hz (60Hz) ; 2,2 kW
400V ~50Hz (60Hz) ; 3 kW from construction year end 2020
Hydraulic pump 400V ~50Hz (60Hz) ; 1,4 kW
Coolant pump 400V ~50Hz (60Hz) ; 0,1 kW
Total connected load 3x400V ~50Hz (60Hz); 3.8 kW
2.2 General
Raising the saw bow manual and hydraulic
Feed hydraulic by means of a lowering cylinder
Dimensions of saw blade [mm] 3770 x 34 x 1.1 mm
Dimensions

Dimensions on page 18
2.3 Weight
Net weight of the metal belt saw [kg] 645
Floor loading [KN/m
2
] 7
2.4 Speed of saw band
G110M Inverter, basic frequency ~50Hz 20 - 80 m/min
2.5 Operating material
Gear Mobilgear 636, viscosity 680 mm
2
/s (about 1.5 liters)

„5.3
Recommended operating materials“ on page 48
Spindle of the machine vice Commercial lubricating grease

Recommended operating materials on page 48
Slide bearing Commercial lubricating grease

Recommended operating materials on page 48
Coolant equipment
commercial lubricant and coolant, approx. 36 litres

Recommended operating materials on page 48
2.6 Environmental conditions
Temperature 5 - 35 °C
Humidity 25 - 80 %