Optimum Optimum 3292385, Руководство по эксплуатации, Страница: 11 / 80

Safety
Version 1.0.4 - 2020-10-13 11 Translation of original instruction
SD500AV EN
SD500A
V_G
B
_1.
fm
Before starting work on electrical parts or operating agents, following measures are to be
performed in the following order:
- disconnect all poles
- secure against restarting
- check that there is no voltage
1.8 User positions
The operator must stand beside or in front of the metal band saw.
1.9 Safety devices
Use the metal belt saw only with properly functioning safety devices.
Stop the metall band saw immediately if there is a failure on the safety device or if it is not func-
tioning for any reason.
It is your responsibility!
If a safety device has been activated or has failed, the metal belt saw must only be used if you

the cause of the fault has been eliminated,

you have verified that there is no danger to personnel or objects.
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other persons working on the metal belt saw. The possible consequences
are:

injuries due to components or workpieces flying off at high speed,

contact with rotating and revolting parts,

and fatal electrocution.
The metal belt saw features the following safety devices:

a lockable main switch,

an emergency stop switch,

a saw band casing with protective cover and position switch,

position switch for the saw band tension,

protective covers of the saw band guide.
WARNING!
Although the isolating safety devices provided and delivered with the machine are desi-
gned to reduce the risks of workpieces being ejected or parts of tools or workpieces bre-
aking off, they cannot eliminate these risks completely.
1.9.1 Lockable master switch
In the "0" position, the lockable main switch can be secured against accidental or non-authori-
sed switching on by means of a padlock.
The power supply is interrupted by switching off the main plug.
Except for the areas marked by the pictogram in the margin.
WARNING!
Dangerous voltage even if the main switch is switched off. The areas marked by the
pictogram might contain live parts, even if the main switch is switched off.