Optimum Optimum 3292385, Руководство по эксплуатации, Страница: 14 / 80

Safety
Version 1.0.4 - 2020-10-13 14 Translation of original instruction
SD500AV
EN
SD500A
V_G
B
_1.
fm
1.12 Safety during operation
WARNING!
Danger to life from electromagnetic fields. Electromagnetic fields (EMF) are generated by
the operation of electrical power equipment such as transformers, converters or motors.
People with pacemakers or implants are at a special risk in the immediate vicinity of
these devices/systems.

Ensure that the persons involved are the necessary distance away (minimum 2 m).
CAUTION!
Danger due to inhaling dust and mist that are hazardous to health.
Depending on the materials to be machined and the agents used, dusts and mists can
arise that are detrimental to health.
Ensure that the harmful dust and mist generated are safely sucked off at the point of
origin and routed away from the working area or filtered. To do so, use a suitable
extraction unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Extra precautionary measures must be taken before machining flammable materials (e.g.
aluminium, magnesium) or using combustible agents (e.g. spirit) to avert a health
hazard.
WARNING!
Before switching on the metal belt saw make sure that there are

no dangers generated for persons,

no objects are damaged.
Avoid any unsafe work methods:

Make sure that nobody is endangered by your work.

The rules specified in these operating instructions must be observed during assembly, ope-
ration, maintenance and repair.

Do not work on the metal belt saw, if your concentration is reduced, for example, because
you are taking medication.

Observe the accident prevention regulations issued by your Employers Liability Insurance
Association or other supervisory authorities applicable to your company.

Stay at the metal belt saw until all movements have come to a complete standstill.

Use the prescribed personnel protective equipment. Make sure to wear a well-fitting work
suit and, if necessary, a hairnet.

Inform the supervisor about all hazards or faults.
1.13 Safety during maintenance
Report and
document any
changes
Inform the operators in good time of any maintenance and repair works.
Report all safety relevant changes and performance details of the metal belt saw. Any changes
must be documented, the operating instructions updated and machine operators instructed
accordingly.
1.13.1 Disconnecting and securing the metal belt saw
Disconnect the main plug of the metal band saw and secure the metal band saw against restar-
ting.
Attach a warning sign on the machine.