OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.3.0 dated 2016-12-16
Page 31
Original operating instructions
MF2 Vario
GB
Img.4-5:
Main switch
4.5
Raising / lowering the cross table
You can raise or lower the cross table using the crank handle.
Loosen the tightening lever.
Engage the handle by pushing it towards the teeth.
Turn the handle to the required position for the cross table.
The scale has a graduation of 0.2 mm. The zero point can be adjusted using the knurled
nut.
Clamp if needed.
Make sure to tighten the tightening lever again once you have completed the operation.
Img.4-6: Cross table - height adjustment
Crank handle
