OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.3.0 dated 2016-12-16
Page 12
Original operating instructions
MF2 Vario
GB
A switch is integrated in the fixture of the spindle protection which monitors that the cover is
closed.
INFORMATION
You cannot start the machine if the spindle protection is not closed.
1.8.5 Milling table
Seats for T-slots are attached to the milling table.
WARNING!
Risk of injury due to parts flying off at high speed. Securely fix the workpiece on the
milling table.
1.9
Prohibition, warning and mandatory labels
INFORMATION
All warning signs must be legible. Check them regularly.
1.9.1 Control technical protection
WARNING!
If you bypass a controller you endanger yourself and other personnel working on the
milling-machine.
injuries due to tools, workpieces or fragments hereof which are flying off at high
speed,
contact with rotating parts,
fatal electrocution,
pulling-in of clothes.
If you bypass a controller in exceptional cases (e.g. during electrical repairs) short term you
must continuously monitor the milling-machine during this time.
1.9.2 Prohibition, warning and mandatory labels
INFORMATION
All warning and mandatory labels must be legible. Check them regularly.
1.10
Safety check
Check the milling-machine at least once per shift. Inform the person responsible immediately of
any damage, defect or change in operating function.
Check all safety devices
at the beginning of each shift (when the machine is operated continuously),
once per day (during one-shift operation),
once per week (when operated occasionally),
after every maintenance and repair work.
Check that prohibition, warning and information signs and the labels on the milling-machine
are legible (clean them, if necessary),
are complete (replace them, if necessary).
