OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.3.0 dated 2016-12-16
Page 10
Original operating instructions
MF2 Vario
GB
1.6.2 Authorized personnel
INFORMATION
For working on the milling-machine sufficient expertise is required. No one must work
on the machine without having the necessary education, not even for a short while.
WARNING!
Inappropriate operation and maintenance of the milling-machine constitutes a danger for
the personnel, objects and the environment.
Only authorized personnel may operate the milling-machine !
Persons authorized to operate and maintain should be trained technical personnel and
instructed by the ones who are working for the operating company and for the manufacturer.
The operating company must
Obligations of
the operating
company
train the personnel,
instruct the personnel in regular intervals (at least once a year) on
- all safety standards that apply to the milling-machine,
- operation of the milling-machine,
- accredited technical guidelines,
- possible emergency situations,
check personnel‘s state of knowledge,
document training/instruction in a operation book,
require personnel to confirm participation in training/instructions by means of a signature,
check whether the personnel is working safety- and risk-conscious and observe the operat-
ing instructions.
The operator must
Obligations of
the operator
be specially trained in handling and programming the milling-machine,
know and understand the program sequence and which effects the individual process
parameters will have,
keep an operator‘s log,
before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
Additional
requirements
regarding the
qualification
For work on the following milling-machine parts there are additional requirements:
Electric components or operating materials: Must only be performed by a qualified electri-
cian or person working under the instructions and supervision of a qualified electrician.
1.7
Operator positions
The operator position is in front of the milling-machine at the sight window or on the machine
control panel.
1.8
Safety devices
Use the milling-machine only with properly functioning safety devices.
Stop the milling-machine immediately if there is a failure on the safety device or if it is not func-
tioning for any reason.
It is your responsibility!
If a safety device has been activated or has failed, the milling-machine must only be used if you
have removed the cause of the failure,
have verified that there is no danger resulting for the personnel or objects.
