G
B
2008
Maintenance
OPTIMUM
M A S C H I N E N - G E R M A N Y
Interval
Where? What?
How?
Cross table
Adjusting screw taper gib
X axis right
Adjusting screw taper gib
Y-axis front
g
i
b
Readjust
as required
T
a
p
e
r
X- and Y axis
Illustr. 5-8: Cross table
Turn the adjusting screw of the respective taper gib front
and rear, or left and right in the clockwise direction. The
taper gib is continued to push in and reduced by it the gap
in the guide way.
Control your attitude. The respective guide way must be
still easily mobile from the adjustment, result in however a
stable guidance.
Adjusting screw taper gib
Z-axis top
g
i
b
Readjust
as required
T
a
p
er
Z-axis
Adjusting screw taper gib
Z-axis bottom
Illustr. 5-9: Column and mill head
As described under "readjust X- and Y-axis".
INFORMATION!
The spindle bearing arrangement is continuously lubricated. It is not required to relubricate it.
Stand 16 / 09 / 2008
Version 1.0.3
BF 30 Vario
Drilling-Milling machine
Page 35
