OPTIMUM
Safety
M A S C H I N E N - G E R M A N Y
1.5.4
Separating protective equipment
Adjust the protective equipment to the
correct height before you start working.
To do so, detach the clamping screw,
adjust the required height and retighten
the clamping screw.
A switch is integrated in the fixture of the
spindle protection which monitors that the
cover is closed.
INFORMATION
YOU CANNOT START THE MACHINE IF
THE DRILL CHUCK PROTECTION IS
NOT CLOSED.
Locking screw
Illustr. 1-4: Separating protective equipment
1.6
Safety check
Check the drilling-milling machine
regularly. Check all safety advices
at the beginning of each shift,
once a week (with the machine in operation),
after every maintenance and repair operation.
General check
Equipment
Check
OK
Protective covers
Fitted, firmly bolted and not damaged
Labels,
Installed and legible
markings
Run test
Equipment
Check
OK
EMERGENCY-STOP but-
When the EMERGENCY-STOP button is activated, the drilling-
ton
milling machine should switch off. A restart will not be possible
until the EMERGENCY-STOP button has been unlocked and the
ON switch has been activated.
Separating protective
Only switch on the drilling-milling machine if the protective equip-
equipment around the dril-
ment is closed.
ling and milling spindle
Page 10
Drilling-Milling machine
BF 30 Vario
Version 1.0.3
16 / 09 / 2008
2008
GB
