OPTIMUM
Operation
M A S C H I N E N - G E R M A N Y
Loosen the handle screw ( Illustr. 4-
6: „Handle screw“ on page 27) .
The spindle sleeve lever moves away from the drill-mill head and disengages the clutch of the
fine feed.
4.11
Digital display for spindle sleeve travel
4.11.1
Technical data
Measuring range
mm
0 - 999,99
inch
0 -
39,371“
Reading precision
mm
0,01
inch
0,00
04“
Power supply
round cell 1,55V
145mAh (SR44)
11,6 x 5,4mm
4.11.2
Design
Off - switch
LCD display
Conversion
mm/inch
On - switch
Zeroing
Value increase
Battery bay
Value decrease
Illustr. 4-7: Digital display
ON / O,
switches the display on and resets the reading of the display to "0".
mm/in,
converts the measuring unit from
millimetres
to
inches
and vice versa.
OFF,
switches the display off.
,
performs a value increase.
,
performs a value decrease.
INFORMATION
Before inserting the new battery, wait about 30 seconds. Please make sure, that the contacts
are metallically bright and free from coverings which result from bleeding or gassing batteries.
Grip the new batteries only with plastic forceps, if possible not with the hand due to the forma-
tion of oxide and never with metal forceps in order to avoid a short circuit. In most cases the
round cell will be inserted into the digital display with the marking upside. After inserting the
round cell, the battery compartment has to be closed again.
Page 28
Drilling-Milling machine
BF 30 Vario
Version 1.0.3
Stand 16 / 09 / 2008
2008
GB
