G
B
2008
Safety
OPTIMUM
M A S C H I N E N - G E R M A N Y
ATTENTION!
The EMERGENCY-STOP button switches off the drilling-milling machine immediately.
Only press the EMERGENCY-STOP button in case of danger! If the emergency stop but-
ton is actuated in order to stop the drilling-milling machine generally you might damage
tools or workpieces.
After actuating the button, turn it to the right, in order to restart the machine.
1.5.2
Lockable main switch
In the position " 0 " the lockable main
switch can be secured against accidental
or non-authorised switching on by means
Main switch
of a padlock.
When the main switch is switched off, the
current supply is been interrupted.
Except for the areas marked by the picto-
gram in the margin.
Illustr. 1-2: Main switch
WARNING!
Dangerous voltage even if the main switch is switched off. In the areas marked by the
pictogram in the margin, there might be voltage, even if the main switch is switched off.
1.5.3
Protective cover
The drill-mill head is fitted with a
protective cover.
Protective cover
WARNING!
Remove the protective cover only
after the mains plug of the drilling-
milling machine has been pulled.
Illustr. 1-3: Protective cover
16 / 09 / 2008
Version 1.0.3
BF 30 Vario
Drilling-Milling machine
Page 9
