Version 1.0.4 - 2020-12-15
15
Translation of original operating manual
MH25SV
EN
MH
25
SV
_GB_
1.
fm
1.9.4
Separation guard
Adjust the guard to the correct height
before you start working.
To do so, detach the clamping screw,
adjust the required height and re-tighten
the clamping screw.
A switch is integrated into the fixture of the
spindle protection which monitors that the
cover is closed.
INFORMATION
You cannot start the machine if the spindle
protection is not closed.
Img.1-2:
Separation guard
1.10
Safety check
Check the milling machine at regular intervals.
Check all safety devices
before each operation,
once a week (with the machine in operation),
after all maintenance and repair work.
General check
Equipment
Check
OK
Guards
Mounted, firmly bolted and not damaged
Signs,
Markers
Installed and legible
Functional check
Equipment
Check
OK
Emergency stop mushroom
button
When the emergency stop mushroom button is activated, the milling
machine must switch off. It is only possible to restart the machine if the
emergency stop mushroom button is unlocked and the ON switch is
activated.
Separation guard around the
drilling and milling spindle
The milling machine should only switch on when the guard is closed.
