Version 1.0.4 - 2020-12-15
39
Translation of original operating manual
MH25SV
EN
MH
25
SV
_GB_
5.
fm
In case of soiling
Limit s
w
itch
es, r
eed
c
o
n
tacts
Cleaning
The limit switches must be cleaned regularly to ensure further
trouble-free operation.
Img.5-1:
Milling head
Img.5-2:
Milling table
As required
Sp
in
dl
e nu
t
Mil
lin
g head
Adjustment
Z axis
Increased play in the milling head spindle can be reduced by
adjusting the spindle nut. The spindle nuts are readjusted by
reducing the thread flanks of the spindle nut with two take-up
screws. Due to the readjustment, it is necessary to check if
smooth movement over the entire way is still provided, other-
wise wear is considerably increased due to friction between
the spindle nut and the spindle.
Img.5-3:
Milling head
Interval
Where?
What?
How?
Contactless position
switches
Contactless position
switches
Take-up screws
