Version 1.0.4 - 2020-12-15
40
Translation of original operating manual
MH25SV
EN
MH
25
SV
_GB_
5.
fm
As required
Adjustment gib
Mil
lin
g head
Adjustment
Z axis
Turn the take-up screws of the gib clockwise. The gib is
pushed further inward thus reducing the play in the guide-
way.
Check the settings. The corresponding guideway must be
more easily moveable but ensure a stable guiding.
Img.5-4:
Take-up screws Z axis
Sp
in
dl
e nu
t
Cr
oss
ta
bl
e
Adjustment
X axis
An extended clearance in the spindles of the cross table can
be reduced by adjusting the spindle nuts. The spindle nuts are
adjusted by reducing the thread flanks of the spindle nut by
means of a take-up screw. Due to the readjustment, it is nec-
essary to check if smooth movement over the entire way is still
provided, otherwise wear is considerably increased due to fric-
tion between the spindle nut and the spindle.
Img.5-5:
Cross table
Spindle nut
Cro
ss tab
le
Adjustment
Y axis
Interval
Where?
What?
How?
Gib
Take-up screws
Take-up screw
Take-up screw
