Optimum 333 8160, Руководство по эксплуатации

Страница: 8 / 72

Version 1.0.4 - 2020-12-15 8 Translation of original operating manual
MH25SV EN
MH
25
SV
_GB_
1.
fm
1.3 Intended use
WARNING!
In the event of improper use, the milling machine

will endanger personnel,

the milling machine and other material property of the operating company will be
endangered,

the correct function of the milling machine may be affected.
The milling machine is designed and manufactured to be used for milling and drilling cold met-
als or other non-flammable materials or materials that do not constitute a health hazard by
using commercial milling and drilling tools.
The milling machine must only be installed and operated in a dry and well-ventilated place.
If the milling machine is used in any way other than described above, modified without the
approval of the company Optimum Maschinen Germany GmbH, the milling machine is being
used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee or CE conformity will expire, if any constructive, tech-
nical or procedural changes are not performed by the company Optimum Maschinen Germany
GmbH. It is also part of intended use that you

the maximum values for the milling machine are complied with,

the operating manual is observed,

the inspection and maintenance instructions are observed.

Technical data on page 18
Warning: automatic start-
up!
Warning: tilting danger! Warning: suspended loads! Caution, danger of
explosive substances!
Activation forbidden!
Read the operating
instructions before
commissioning!
Disconnect the mains plug! Wear protective glasses!
Wear protective gloves! Wear safety shoes! Wear a protective suit! Use ear protection!
Only switch when stopped! Protect the environment!
Contact address