background image

Windows XP Information

D - 28 System Power Options

D

Stand by

Stand by saves the least amount of power, but takes the shortest time to return to full
operation. During Stand by the hard disk is turned off, and the CPU is made to idle
at its slowest speed. All open applications are retained in memory. When you are not
using your computer for a certain length of time, which you specify in the operating
system, it will enter Stand by mode to save power. 

Hibernate

Hibernate uses no power and saves all of your information on a part of the HDD be-
fore it turns the system off. Although it saves the most power it takes the longest time
to return to full operation. You can set your computer to automatically enter Hiber-
nate mode when the battery power is almost depleted. You will need to enable Hi-
bernate mode from the 

Hibernate

 tab in the Power Options control panel. 

The

system will resume from Hibernate mode by pressing the power button

.

System Resume

The system can resume
from Stand by mode by:

• Pressing the power

button

• Pressing the 

Sleep/

Resume

 key combi-

nation

• An incoming call

received on the
modem (if enabled)

• Network card (Wake

On LAN) activity (if
enabled)

Figure D - 18

Enable Hibernation

Содержание WO141PI

















































































































































































































































Отзывы: