Plan Your
Project
All CabLED components are rated IP65 and are designed for both
indoor and outdoor use.
Decide whether to use Warm or Cool White CabLED or a combination
of both colors.
Measure the length of each section, rounded off to the nearest 7.09
inch (18cm) interval to determine how much CabLED you will need.
Do NOT cut the CabLED or push the connectors together before you
are ready to install.
Power
Refer to the power supply chart to determine correct power supply.
NOTE: Using an insufficient power supply will not light the system to its
full potential or may cause it to flicker.
Connectors
Measure each section and adjust your project to determine the
connectors you will use. Each connector has been designed for a
specific purpose, but you may have a few choices for your particular
needs. Use the "Component Layout" section for an overview of the
connectors and how they can be used.
Installation
Follow the instructions carefully when cutting CabLED and attaching
the connectors.
Test your installation before mounting.
Mounting
Use one of the five mounting solutions.
Tips
Use the Trouble Shooting section when you have problems or contact
our Customer Service Department.
Safety Goggles
Pliers
Tape Measure
2
1
Pencil
Scissors
Note Pad
Screw Drivers
Power Drill
Design Guidelines
12
cabled.optiled.com
Tools Needed
