6.2 Use One of the Following Five Methods to Mount CabLED™
cabled.optiled.com
33
into
bottom
slide
into
lip
snap
Double sided tape
Double sided tape
B
Apply double sided tape on the back of
one Angle Channeling. Fit the edge of the
Angle Channeling into the slit of the second
Angle Channeling to pair up two CabLEDs
for double the brightness. (note : pairing
maximum of two CabLED is recommended.)
C
Apply double sided tape on the bottom
of the first Angle Channeling. Tape Angle
Channeling onto the cove surface according
to the desired direction of the light.
A
Slide CabLED at an angle into the longer
side of the Angle Channeling, and then push
down to snap strip into place. Repeat fot the
second Angle Channeling.
Install Double Angle Channelings
Angle Channeling fits into the corner of two surfaces and directs the light at a 30 degree angle.
You may pair up two Angle Channelings with two CabLEDs for the double brightness.
