IMPORTANT SAFETY INSTRUCTIONS
cabled.optiled.com
3
POWER SOURCE
Do not modify the plug provided with the product – If it will not fit the outlet, have a proper
•
outlet installed by a qualified electrician.
Damaged or deformed power cords are hazardous and should be replaced immediately by a
qualified service technician.
OPERATION
Do not operate with the flexible light tightly coiled.
•
Do not puncture, cut, shorten, or splice the flexible lighting.
•
Unplug the unit and the AC power adapter from the electrical outlet during electrical storms
•
or when unused for long periods of time to prevent damage.
For outdoor use units, make sure that all connections and the end cap in the last segment are
•
tightly secured to preclude the entry of water.
Do not exceed the recommended length of CabLED strip listed for each power supply.
•
Do not look directly into the LED lights when lit. They are powerful and could damage your
•
vision.
LOCATION
Place power supply well above the ground or in an area they will NOT be submerged in water
•
or other liquids.
The CabLED strip and components are rated IP65, weather proof only. Do not submerge the
•
flexible lighting in liquids, or use the product in the vicinity of standing water or other liquids.
Keep all components away from extreme heat sources such as heating vents, radiators, electric
•
heaters and fire pits.
Do not cover this product as the covering may cause the flexible light to overheat and melt or
•
ignite.
Do not submerge the flexible light in liquids, or use the product in the vicinity of standing
•
water or other liquids.
Do not route the cord or flexible lighting through walls, doors, windows or any like part of the
•
building structure.
Place CabLED strip so it will not shine directly into people's eyes.
•
INSTALLATION
Safety measures must be observed at all times during the installation of this product. Use proper
safety gear and tools during the installation process to prevent physical injury.
Products should be installed in accordance with the user manual, current electrical codes and/
•
or the current National Electric Code (NEC). Improper installation may cause a possible shock
or fire hazard.
To avoid electrical shock and/or damage to the system, do not handle the components with wet
•
hands.
Always make sure the CabLED strip is disconnected from the power source before cutting,
•
connecting, mounting or modifying in any way. Do NOT dismantle the CabLED strip itself.
Do not coil the strip into a tight circle with a diameter less than 8 inches (20cm) or bend it in
•
half as it may damage the LEDs embedded in the strip.
Do not subject the flexible CabLED strip to continuous flexing.
•
WARNING:
Risk of fire and electric shock. Uncoil flexible CabLED light
strip prior to plugging into receptacle.
!
