OPTARC AF51 Скачать руководство пользователя

Страница: 8 / 99

Legal Information

Copyright

Trade Marks

OptArc and the OptArc logo are Registered Trade Marks of Dr Paul J. Tadrous

(registered with the UK Intellectual Property Office).

Limitations of Use

This equipment is released to be used for research and educational purposes only.

The

AF51 camera is supplied and sold on the understanding that this is an item of custom

equipment for scientific research applications.

Disclaimer

Only competent people trained in the use of handling of photographic, video, computer

and optical equipment should use this product.
There is a risk of physical damage to the body / casing of eyepieces that have this camera

clamped onto them. The camera must not be affixed to an eyepiece if such risk is

unacceptable to the user or owner of the eyepiece. This notice is given here as fair

warning. Dr Paul J. Tadrous, TadPath and OptArc cannot accept any liability for any such

damage to eyepieces.
Dr Paul J. Tadrous, TadPath and OptArc cannot accept any liability for any loss or

damages that may occur from the misuse or mis-handling of this product or from the

failure to heed and abide by the warnings and safety notices set out in this document.
All information in this document is believed to be accurate according to the research and

understanding of the author and is provided in good faith and in the hope that it will be

useful. However, errors and omissions may be included herein. If any of this information is

considered important to some application the user should verify that information from

independent sources. Dr Paul J. Tadrous, TadPath and OptArc cannot accept any liability

for any loss or damages that may occur due to errors or omissions contained in this

document.
The descriptions and data presented in this manual only pertain to the genuine OptArc

AF51 camera sold via OptArc.co.uk. Similar looking clones may claim to share many or all

of the features of the AF51 but may not respond or perform in the way described in this

manual.

OptArc AF51 Camera Page 8 of 99 User Guide v1.02

Содержание AF51




































































































Результаты поиска

Содержание AF51

Отзывы:

Похожие инструкции для AF51

Бренды по названию

Популярные бренды

OPTARC AF51, Руководство пользователя

Результаты поиска

Содержание AF51

Отзывы:

Похожие инструкции для AF51

Бренды по названию

Популярные бренды