1. Introduction
What’s included in the box
The AF51 package sold by OptArc.co.uk includes the following components (figure 1.1):
Figure 1.1 The components of the standard AF51 camera kit supplied by OptArc. The numbers refer to the
items listed in the text. These are the only components supplied. All other accessories shown in this manual
need to be purchased or otherwise acquired separately.
1. AF51 camera body with two centration adjustment screws and a female tripod thread
socket to accept a standard 1/4-20 UNC threaded tripod screw (a tripod is not included)
and a ‘Type A’ USB male connector on the end of an approximately 42 cm long USB
cable.
2. A protective lens cap shown here removed from the lens. The camera will ship with this
lens cap in place and the user must unscrew it to begin using the camera (see figure 1.2)
3. An adjustment screw tightening / loosening tool
OptArc AF51 Camera Page 11 of 99 User Guide v1.02
