Online Power Protector 3 Скачать руководство пользователя

Страница: 64 / 98

OnLine Power

6-25

6.18.6.8

MENU SELECTON:

The

following

selection

options are avalable and the typical samples are shown in next pages.

INFORMATION:

SYSTEM STATUS -

Show system information and network settings values shown here are by users.

BASIC INFORMATION- Show about U.P.S manufacturer/ UPS firmware revision / UPS model.

CURRENT STATUS-

Show the UPS current status. Users can choose an internal. They are input,
output, and battery status.

REMOTE CONTROL-

Provide remote UPS test fuctions, presently not provided.

METER / CHART-

Displays temperature, capacity, load, voltage of the UPS by a chart and by
appearing with meters diagram, input voltage, output voltage, temperature,
frequency, load , and capacity.

CONFIGURATION :

UPS CONFIGURATION-Set the UPS configuration such as NO. of batteries, charge voltage, date of last

battery replacement, UPS data log, UPS test schedule, length of UPS
testing,critical loading (%), temperature (C), and critical capacity (%).

UPS ON/OFF SCHEDULE-Schedule on/off time for the UPS & set the time to turn on/off the UPS on

particular days, weekly, and send a warning massege before a schedule
shutdown and wake On-LAN to wake the PC within the network.

NETWORK:

•

Set IP address, net agent subnet mask, net agent gateway and obtain an IP address.

•

Sert primary DNS server IP, secondary DNS server IP.

•

Set comunication speed fet ween net agent and network.

•

Set stop UPS communication when net agent disconnects with athernet.

•

Allow the user to alias a dymanic IP address.

•

Allow Net Agent to connect the internet directly using your XDSL modem with
login name and login password.

SNMP-

•

Set net agent SNMP settings so it can be used by a NMS.

•

Give system name, a name to administrator, net agent location.

Содержание Protector 3



































































































Результаты поиска

Содержание Protector 3

Отзывы:

Похожие инструкции для Protector 3

Бренды по названию

Популярные бренды

Online Power Protector 3, Руководство пользователя

Результаты поиска

Содержание Protector 3

Отзывы:

Похожие инструкции для Protector 3

Бренды по названию

Популярные бренды