LIBRETTO ISTRUZIONI - INSTRUCTION MANUAL
24
EN
PROGRAMMING THE AUTOMATIC CLOSING TIME
CAUTION to enter programming it is necessary that the gate is in the closed position.
17
A-
Completely close the gate
. Press and release
button SET, the led DL2 flashing
B- Press and release button SET TX, the flashing
light is ON, counting start the time automatic
reclosing
Inizio conteggio
Counting starts
Fine conteggio
Counting stop
C- For stop counting press again SET TX button
DL2
SET
DL2
SET TX
FLASHING
LIGHT
START
TIMER
12
3
6
9
SET TX
STOP
TIMER
12
3
6
9
DISABLE THE AUTOMATIC RECLOSING FUNCTION:
CAUTION to enter programming it is necessary that the gate is in the closed position.
A-
Completely close the gate
. Press and release
button SET, the led DL2 flashing
B-
Press and hold button SET TX for 8 seconds
Inizio programmazione
Start programming
DL2
SET
DL2
SET TX
REMOVE
AUTOMATIC
RECLOSING
FUNCTION
x 8 sec.
DL2
Attention with active automatic reclosing function:
- when the gate is open ,AFTER A START command or the remote control, you delete the automatic reclosing
- when the gate is open and active
community feature
function, after a START or the remote control command, starts the counting of
the automatic close time
- when gate open is and waiting the automatic reclosing the flashing stay ON
18
RETURN TO DEFAUT SETTINGS:
-REMOVE POWER TO CONTROL BOARD
-press and hold the SET button
- turn ON the power by holding the SET button down for at least 5 seconds
The default settings are:
- working time 21 secondi
- Time of automatic closing 3 seconds
