81 of 135
(3) SAVE communication setting (
SAVE
)
This command allows the reader to write communication setting into the nonvolatile memories in the reader.
If SET Communication command (SETC) is executed and then the reader is started up without executing
this command (SAVE), new setting will be abandoned.
Command
SAVE<LF>
Note: No arguments.
Response
SAVE[RC]<LF>
[RC]: Response Code
Example 1) When communication setting is saved (New setting is written into the nonvolatile memory):
[Tx] SAVE<LF>
[Rx] SAVE0000<LF>