background image

10001507A    27NOV02

 

The user is referred at this point to the applicable Motorola 
M12 ONCORE User’s Manual for details on operation of the 

M12+ 

contained in the 

G-SynQ  

antenna. 

 

Software—

 Windows based software to communicate with 

the G-SynQ is available on the Synergy Systems website. 
 
Motorola’s 

WinOncore12 

program is a free download that 

may be accessed from the home page. An evaluation copy 
of Synergy’s 

SynTaC  

software is available from the 

Techni-

cal Support

 page of the website.  

 

Support—

If you have any problems at all, please do not 

hesitate to contact Synergy’s technical support team, either 
by the phone number on the front of this document, or by 
email at: [email protected] 

P.O. Box 262250                  TEL:  858.566.0666 
San Diego, CA  92196          FAX: 858.566.0768 
 

Internet: http://www.synergy-gps.com 

E-Mail:    [email protected] 

 

G-SynQ Antenna Evaluation Kit 

USER’S GUIDE 

Summary of Contents for G-SynQ

Page 1: ...load that may be accessed from the home page An evaluation copy of Synergy s SynTaC software is available from the Techni cal Support page of the website Support If you have any problems at all please do not hesitate to contact Synergy s technical support team either by the phone number on the front of this document or by email at tech synergy gps com P O Box 262250 TEL 858 566 0666 San Diego CA 9...

Page 2: ...eferred to the M12 User s Guide Basic connection details are as follows 1 The 2 meter serial cable is connected between the Interface Assembly and the serial port on the host computer 2 Optional The 2 meter 1PPS coax is connected between the RCA jack on the back of the Interface Assembly and whatever equipment is being used to monitor the 1PPS pulse oscilloscope time inter val analyzer etc 3 The 1...

Page 3: ...y the user this LED will appear to be glowing constantly at decreased bright ness as the eye cannot follow the 100PPS switch ing of the LED PRODUCT DESCRIPTION The G SynQ Evaluation Kit comprises all of the components necessary for the system integrator to evaluate the perform ance of the Synergy Systems G SynQ antenna These components include the G SynQ antenna itself an Interface Electronics Ass...

Page 4: ...nterface Assembly connector pinouts are as follows Rear Panel View of the Interface Assembly Showing Connector Placement PIN SIGNAL Pin 1 1PPS To Host Pin 2 TxD Data To Host Pin 3 RxD Data to G SynQ Pin 5 Signal Common 1PPS The 1PPS signal from the G SynQ antenna is pre sent on the RCA phono jack located on the back panel of the Interface Assembly The Evaluation Kit is supplied with a 2meter long ...

Reviews: