126 of 135
4.4 Update Mode
It is the mode only when update process is proceeding.
While the V750 reader is on Update Mode, all the LEDs (ANT1-4) turn on.
While updating firmware, progress status is shown both web browser and LEDs of the body.
<On the web browser>.
Web browser displays the updating phases. When all the processes are finished, the message "All
Finished. System Resets Automatically." is displayed. (Message on processing depends on firmware
file.)
<On LEDs>
The LEDs of IN1-4 and OUT1-4 show the progress status. When the update process starts, the V750
reader turns off all the LEDs of IN1-4 and OUT1-4, and it lights from IN1, IN2, ... one by one. according
to the status
The steps may vary depending on the firmware file.
When all the process is finished all the LEDs of IN1-4 and OUT1-4 light.
Then the V750 reader restarts 3 seconds after the message (signal) of finishing updating.
WARNING:
Do NOT power off while updating firmware.
WARNING:
Do NOT reload the browser after finishing or being failed update. Please close the window.
NOTE:
Closing web browser before finishing updating, the update process is continued.
When all the update process is finished, web browser displays as the following.