6 of 135
CAUTION
Do not drop the device you may receive major shocks.
z
Doing so may result in personal injury or device damage.
Do not apply strong force to, or place heavy items on the device or cables.
z
Doing so may deform or damage the device, resulting in electric shock or fire.
Use and store the product in an environment that is specified in the catalog or operation
manual.
z
Failure to do so may cause failure of the device, electric shock, or fire. Do not use or store the devices
(Reader, antenna ,antenna cable) in the following locations:
・
Locations that do not satisfy the specified operating conditions (-10 to +50
℃
, 25%RH to 85%RH,non-
condensing).
・
Locations that do not satisfy the specified storage conditions (-25 to +65
℃
, 25%RH to 85%RH,non-
condensing).
・
Locations where the reader is exposed to direct sunlight.
・
Locations where the reader is exposed to dust, corrosive gas, saline, or flammable gas.
・
Locations where the reader is exposed to direct heat.
・
Locations subject to condensation due to high humidity.
・
Locations subject to vibration or impact that exceed the limits outlined in the specifications.
・
Locations where the device may be exposed to water, oil, or chemical agents. (This applies to
the models other than waterproof types.)
・
Outdoor
Be sure to tighten the devices screws securely.
z
Failure to do so may result in personal injury or device damage.
Cables with screw attachments must be secured before use.
z
Failure to do so may damage the device.
To avoid interferences with other systems, adhere to the following items and check them
before using the product.
z
The product uses a publicly available ISM frequency band of 920-925MHz (V750-BA50D04-SG), 919-
923MHz (V750-BA50D04-SG-MY) to communicate with Tags. Some transceivers, motors, monitoring
devices, power supplies (power supply ICs), and other similar RFID systems may generate noise, which cause
radio interference and may affect communication with Tags. If the product is required in the vicinity of these
items, check for any interferences prior to use.
z
On the contrary, the system itself may affect radio station transmissions or medical devices. Be cautious
when using the system in the environments where such effects might occur.
z
To minimize noise effects, adhere to the following:
・
Establish a Class D grounding (former Class 3 grounding) for metal objects placed in the vicinity of the
system.
・
Keep cables away from those with high voltages or heavy currents.