112 of 135
Description of Each Item
Command Entry
Item Description
The range of the set
code.
Default
Response Interface
Interface selection to send
response of the
command
Ethernet / RS-232C /
None
Ethernet
Initial Exec
(*1)
Initial command executed
automatically on booting
Command characters
(None)
Input 1 (*1)
Command executed when
input port 1 is activated
Command characters
(None)
Input 2 (*1)
Command executed when
input port 2 is activated
Command characters
(None)
Input 3 (*1)
Command executed when
input port 3 is activated
Command characters
(None)
Input 4 (*1)
Command executed when
input port 4 is activated
Command characters
(None)
Programmable Output
Item
Description
The range of the set
code.
Default
Output 1 (*1)
Programmable output 1 settings
Function
Output function
synchronize with this port
RUN / ERR / COM /
ANT1 / ANT2 / ANT3 /
ANT 4 / NML / ERC
(None)
Duration [ms]
(*2)
Duration for output
0 or more and less than
9990
(None)
Condition
(*2)
Condition for output
(Available only when
function is NML or ERC)
(None)
Output 2
Programmable output 2 settings
(Setting items are the same as Output 1)
Output 3
Programmable output 3 settings
(Setting items are the same as Output 1)
Output 4
Programmable output 4 settings
(Setting items are the same as Output 1)
*1)
To input commands and select items in the fields of the Initial Exec., Input 1-4 and Output 1-4, check
ON the checkbox attached forward to each item.
*2)
Condition is active only when Function setting is selected as NML or ERC.