![background image](http://html1.mh-extra.com/html/omron/v700-series/v700-series_operation-manual_743606068.webp)
4-3
Section
ID Tag
58
We assume that the V700-D
j
3P21(-Y) ID Tags will be mounted in a case.
If the case will be subjected to strong vibration or shock, we recommend attach-
ing the ID Tag to the case with double-sided tape. Attach the side of the ID Tag
without the OMRON logo (the black side) with the tape.
OMRON logo
Double-sided
tape
Case
Mount the V700-D
j
3P31(-Y) ID Tags so that they will be parallel to the antenna.
The ID Tag’s characteristics are the same whether the front or the back of the ID
Tag is facing the antenna.
Antenna
Mounting Example (Attaching the ID Tag with Adhesive)
We recommend mounting the ID Tag with adhesive or with screws using the
V700-A80 Attachment. See 2-3-4 V700-A80 Attachment for the
V700-D
j
3P31(-Y) ID Tags for details.
Recommended Adhesive
We recommend an epoxy adhesive when mounting the ID Tag to a resin or plas-
tic surface. Verify that the epoxy’s approved temperature range exceeds the
maximum ambient temperatures where the ID Tag will be mounted.
Note Epoxy adhesive may not provide enough holding strength when the ID Tag is
being mounted to polyethylene, polypropylene, Teflon compounds, or silicone
compounds. Contact the adhesive maker for details on compatible surfaces.
V700-D
j
3P21(-Y) ID Tag
Orientation
V700-D
j
3P31(-Y) ID Tag
Orientation
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]