background image

ALCOVE

 See the clock in each section for estimated installation time.

Universal Alcove Install Guide Rev A

TM

Alcove Shower System Installation Guide

Congratulations on the purchase of your new shower package. This guide will give you 

the instructions on the installation of your new shower.

Sistine Stone

 showers are ideal for an experienced "DIYer". Please read through this entire installation guide 

before beginning your installation. If you feel you can not confidently install this shower by yourself hire a 

licensed contractor, handyman, or professional installer that can do it for you. Installation time may vary 

depending on your experience, complexity of shower, and "Pre-Install Prep Work" which may include: 

plumbing and/or drain relocation, bathroom demolition, and squaring up studs and floor.

Watch our Installation and Product Videos on americanbathfactory.com/pages/videos

Prior to demolition, scheduling your installer, or building your shower, double check that you have all the 

parts from the factory. Some applications may require a licensed plumber or contractor. Do not use any 

product spec sheets to begin installation before receiving product. These spec sheets are for reference 

only. Use actual product measurements only. The diagrams throughout this guide illustrate a 60" x 30" 

shower. Depending on the size of the shower purchased, actual parts may vary in size from the diagrams 

shown.

Our goal is to help you achieve a quick and successful shower installation.

Check Your Order Before Installation

Please inspect shipment thoroughly upon receipt and before starting the installation. Missing or 

damaged stone and hardware should be reported within 24 hours of receiving this shipment. 

For assistance, call us at 1-800-454-2284 at Ext 22 Monday through Friday from 7:15 am - 4 pm

 

(Pacific) 

or email us at [email protected].

Go step-by-step through the guide verifying you have all the parts for each step 

depending on your model description in each section.

1

Summary of Contents for Sistine Stone Alcove












Reviews: