6-6
Section
Functions
108
6-6-5 Data Setting
Set the write data in two digits within a range between 00 and FF in hexadecimal.
In the following example, the data is set to 1B.
By pressing the DATA Key, the Programming
Console is ready to accept address input.
The 0 through 9 and the A through F Keys
are available.
6-6-6 Write and Read Data
The data of the desired address of the ID Tag is read and displayed.
Set the start address to 10h and the end
address to 1Fh.
By pressing the SET Key, the data is read
from the ID Tag, and the data is displayed in a
maximum of four bytes beginning with the
start address.
By pressing the Right Key, the start address
increases by 1 and the corresponding data is
displayed in a maximum of four bytes
beginning with the new start address.
Note Make sure that the specified data is within the memory capacity of the ID Tag.
Read
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
