Omron SYSMAC C200H-CT001-V1, Руководство по эксплуатации

Страница: 99 / 110

85
Appendix B
Specifications
Item Specification
Number of axes One per Counter Unit
Operating modes Any of the following six:
Linear mode
Circular mode
Preset mode Gate mode
Latch mode Sampling mode
Count input signals Input A
Input B
Counting signal level
CT001-V1: 5, 12, or 24 VDC (Selected when wiring).
CT002: Same as RS-422 line driver (Am26LS31-compatible).
Input modes
Offset phases
Separate up and down inputs
Pulse and direction inputs
Counting speed
CT001-V1: 50 kcps max.
CT002: 75 kcps max.
(Depends on encoder when using offset phase inputs. Refer to 3-2-1 Offset
phases).
Other
Input multiplier (x2 or x4) available for offset phase inputs.
Input signals
Input Z
Control input IN1
Control input IN2
External signal level
CT001-V1: 5, 12, or 24 VDC (Selected when wiring).
CT002: Same as RS-422 line driver (Am26LS31-compatible).
External outputs 8 total
Output level
External output power supply: 5 to 24 VDC
Switching capacity: 16 to 80 mA
Internal consumption 300 mA max. at 5 VDC (supplied from rack).
Weight 400 g max. (excluding connectors).
Maximum Required Response Speed (Pulse Input to Output)
No. of ranges Linear mode Circular mode
1 0.74 ms 0.66 ms
8 1.17 ms 1.02 ms
16 1.40 ms 1.10 ms
Note Add the I/O refresh time (approximately 3 ms) to the values in the above table to
compute the response speed when the I/O refresh timing differs from the output
timing.